|
|
Check
it out on YouTube!
NOTES:
-
ALL TIMES ARE APPROXIMATE.
-
We DON'T guarantee to follow this agenda,
nor to cover all material on this agenda,
nor to cover only the material already on this agenda.
-
Sunday July 31: 12:00noon-4:00pm @ OU only:
LittleFe
Buildout
(Carson Engineering Center
202)
BY INVITATION ONLY
-
Sunday July 31: doors open 5:30pm @ OU/6:30pm @ PUPR:
@ OU:
Stephenson
Research & Technology Center
Seminar Room
(except tour)
@ PUPR:
Engineering Laboratories Building, room L 301
Video with slides
-
Monday August 1:
doors open 8:00am @ OU/8:30am @ PUPR:
(Carson 205+206
except supper;
Lab L 301 except meals in Multi-Purpose Building cafeteria)
-
8:00am @ OU in Carson 205+206/
8:30am @ PUPR in Multi-Purpose Building cafeteria:
BREAKFAST
-
8:30-10:00am @ OU/9:30-11:00am @ PUPR:
OpenMP review lecture
Henry Neeman
PowerPoint
PDF
Video
-
10:00-10:30am @ OU/11:00-11:30am @ PUPR:
MIDMORNING BREAK
-
10:30-12:00noon @ OU/11:30am-1:00pm @ PUPR:
OpenMP review lab
Henry Neeman
Catch-up Exercise: Unix and Batch Computing
Word
PDF
OpenMP exercise
Word
PDF
-
12:00noon-1:30pm @ OU in Carson 205+206/
1:00-2:30pm @ PUPR in Multi-Purpose Building cafeteria:
LUNCH
-
1:30-3:00pm @ OU/2:30-4:00pm @ PUPR:
MPI review lecture
Henry Neeman
PowerPoint
PDF
-
3:00-3:30pm @ OU/4:00-4:30pm @ PUPR:
MIDAFTERNOON BREAK
-
3:30-5:00pm @ OU/4:30-6:00pm @ PUPR:
MPI review lab
Henry Neeman
Catch-up Exercise: MPI Hello World
Word
PDF
Catch-up Exercise: MPI Greetings
Word
PDF
-
5:00-7:00pm @ OU in the Union Heritage Room/
6:00-8:00pm @ PUPR in Multi-Purpose Building cafeteria:
SUPPER
-
7:00-9:00pm @ OU/8:00-10:00pm @ PUPR:
MPI review lab (continued)
Henry Neeman
-
Tuesday August 2:
doors open 8:00am @ OU/8:30am @ PUPR:
(Carson 205+206
except supper;
Lab L 301 except meals in Multi-Purpose Building cafeteria)
-
8:00am @ OU in Carson 205+206/
8:30am @ PUPR in Multi-Purpose Building cafeteria:
BREAKFAST
-
8:30-8:40am @ OU/9:30-9:40am @ PUPR:
Project Guidelines
-
8:40-10:00am @ OU/9:40-11:00am @ PUPR:
Hybrid MPI/OpenMP lecture
PDF
-
10:00-10:30am @ OU/11:00-11:30am @ PUPR:
MIDMORNING BREAK
-
10:30am-12:00noon @ OU/11:30am-1:00pm @ PUPR:
Hybrid MPI/OpenMP lab
-
12:00noon-1:30pm @ OU in Carson 205+206/
1:00-2:30pm @ PUPR in Multi-Purpose Building cafeteria:
LUNCH
-
1:30-3:00pm @ OU/2:30-4:00pm @ PUPR:
Debugging MPI, OpenMP, Hybrid MPI/OpenMP lecture
ODP
PDF
Exercise
PDF
-
3:00-3:30pm @ OU/4:00-4:30pm @ PUPR:
MIDAFTERNOON BREAK
-
3:30-5:00pm @ OU/4:30-6:00pm @ PUPR:
Debugging MPI, OpenMP, Hybrid MPI/OpenMP lab
-
5:00-7:00pm @ OU in the Union Heritage Room/
6:00-8:00pm @ PUPR in Multi-Purpose Building cafeteria:
SUPPER
-
7:00-9:00pm @ OU/8:00-10:00pm @ PUPR:
Open lab
-
Wednesday August 3:
doors open 8:00am
(Carson 205+206)
-
8:00am @ OU in Carson 205+206/
8:30am @ PUPR in Multi-Purpose Building cafeteria:
BREAKFAST
-
8:30-10:00am @ OU/9:30-11:00am @ PUPR:
I/O Libraries lecture and lab
PowerPoint
PDF
NetCDF Build Exercise
Word
PDF
NetCDF Run Exercise
Word
PDF
-
10:00-10:30am @ OU/11:00-11:30am @ PUPR:
MIDMORNING BREAK
-
10:30am-12:00noon @ OU/11:30am-1:00pm @ PUPR:
Scientific Libraries lecture and lab
PowerPoint
PDF
LAPACK Exercise
Word
PDF
-
12:00noon-1:30pm @ OU in Carson 205+206/
1:00-2:30pm @ PUPR in Multi-Purpose Building cafeteria:
LUNCH
-
1:30-5:00pm @ OU/2:30-6:00pm @ PUPR:
LittleFe
Buildout
(at PUPR only)
NOTE:
Wednesday afternoon, NO FOOD will be served
(NO midafternoon snack and NO supper).
YOU
will be entirely responsible for your own food,
including costs.
-
Thursday August 4:
doors open 8:00am @ OU/8:30am @ PUPR:
(Carson 205+206
except supper;
Lab L 301 except meals in Multi-Purpose Building cafeteria)
-
8:00am @ OU in Carson 205+206/
8:30am @ PUPR in Multi-Purpose Building cafeteria:
BREAKFAST
-
8:30-10:00am @ OU/9:30-11:00am @ PUPR:
CUDA lecture 1
PDF
-
10:00-10:30am @ OU/11:00-11:30am @ PUPR:
MIDMORNING BREAK
-
10:30am-12:00noon @ OU/11:30am-1:00pm @ PUPR:
CUDA lab 1
-
12:00noon-1:30pm @ OU in Carson 205+206/
1:00-2:30pm @ PUPR in Multi-Purpose Building cafeteria:
LUNCH
-
1:30-3:00pm @ OU/2:30-4:00pm @ PUPR:
CUDA lecture 2
PDF
-
3:00-3:30pm @ OU/4:00-4:30pm @ PUPR:
MIDAFTERNOON BREAK
-
3:30-5:00pm @ OU/4:30-6:00pm @ PUPR:
CUDA lab 2
-
5:00-7:00pm @ OU in the Union Heritage Room/
6:00-8:00pm @ PUPR in Multi-Purpose Building cafeteria:
SUPPER
-
7:00-9:00pm @ OU/8:00-10:00pm @ PUPR:
Open lab
-
Friday August 5:
doors open 8:00am @ OU/8:30am @ PUPR:
(Carson 205+206
except supper;
Lab L 301 except meals in Multi-Purpose Building cafeteria)
-
8:00am @ OU in Carson 205+206/
8:30am @ PUPR in Multi-Purpose Building cafeteria:
BREAKFAST
-
8:30-10:00am @ OU/9:30-11:00am @ PUPR:
Open Lab
-
10:00-10:30am @ OU/11:00-11:30am @ PUPR:
MIDMORNING BREAK
-
10:30am-12:00noon @ OU/11:30am-1:00pm @ PUPR:
Open Lab
-
12:00noon-1:30pm @ OU in Carson 205+206/
1:00-2:30pm @ PUPR in Multi-Purpose Building cafeteria:
LUNCH
-
1:30-3:00pm @ OU/2:30-4:00pm @ PUPR:
Hybrid MPI/CUDA lecture and lab
PDF
-
3:00-3:30pm @ OU/4:00-4:30pm @ PUPR:
MIDAFTERNOON BREAK
-
3:30-4:30pm @ OU/4:30-5:30pm @ PUPR:
Open Lab
-
4:30-5:00pm @ OU/5:30-6:00pm @ PUPR:
Project presentations for early departers
-
5:00-7:00pm @ OU in the Union Heritage Room/
6:00-8:00pm @ PUPR in Multi-Purpose Building cafeteria:
SUPPER
-
Saturday August 6:
doors open 8:00am
(Carson 205+206)
-
8:00am @ OU in Carson 205+206/
8:30am @ PUPR in Multi-Purpose Building cafeteria:
BREAKFAST
-
8:30am-10:00am @ OU/9:30-11:00am @ PUPR:
Project presentations
-
10:00-10:30am @ OU/11:00-11:30am @ PUPR:
MIDMORNING BREAK
-
10:30am-12:00noon @ OU/11:30am-1:00pm @ PUPR:
Project presentations
-
12:00noon @ OU/1:00pm @ PUPR:
Adjourn
NCSI workshop attendees are required to devise, design
and execute a project during the week of the workshop,
and to give a brief presentation on it at the end of
the workshop (Friday afternoon is strongly preferred).
Projects should be on a topic related to teaching
High Performance Computing and/or
Computational and Data-Enabled Science & Engineering,
whether at the attendee's institution or elsewhere,
and how this teaching will leverage the material covered
in this workshop.
Student attendees may wish to focus more on how they will
put what they've learned to use in their studies.
PRESENTATIONS ON AN ATTENDEE'S RESEARCH ARE
STRONGLY DISCOURAGED.
Presentations should be 5 minutes long, including time
for one or two questions.
TEAM PROJECTS/PRESENTATIONS
by small groups of attendees
are
STRONGLY ENCOURAGED.
A team presentation is limited to 5 minutes total
(NOT 5 minutes per team member).
Offsite remote attendees (via videoconferencing)
CANNOT
do project presentations,
but are welcome to do projects if they want.
OFFSITE REMOTE PARTICIPATION VIA VIDEOCONFERENCING:
TABLE OF CONTENTS
-
EVO:
FREE but
ONLY FOR NON-COMMERCIAL USERS
We STRONGLY recommend EVO for all
non-commercial users.
Commercial users CANNOT use EVO.
-
H.323: FREE
You can connect from an H.323 device
(e.g.,
Polycom
Tandberg/Codian,
Lifesize,
etc)
or from Internet Explorer in Windows.
H.323 can be used for FREE
by both commercial and non-commerical users.
-
Toll free land line phone bridge:
FREE for end users but costs someone else;
donated by OU Information Technology.
PLEASE DON'T USE THE PHONE BRIDGE
UNLESS NOTHING ELSE WORKS FOR YOU.
OU IT's phone bridge
has a limited number of users per session,
and OU IT has to pay for that usage,
so please avoid this unless you have
NO OTHER WAY TO CONNECT.
OU IT's phone bridge can be used for FREE
by all remote offsite participants
‐
but PLEASE DON'T unless you have no other choice.
-
Send questions via Piazza
(explained below).
-
Slides
will be posted to this webpage before each session
(PowerPoint and PDF).
PLEASE DOWNLOAD THE SLIDES BEFORE EACH SESSION STARTS.
-
Streaming video
will be posted to this webpage,
hopefully not long after each session.
OFFSITE REMOTE PARTICIPATION VIA VIDEOCONFERENCING:
INSTRUCTIONS
-
EVO:
FREE but
ONLY FOR NON-COMMERCIAL USERS
We STRONGLY recommend EVO for all
non-commercial users.
Commercial users CANNOT use EVO.
-
Download and install the latest
Java Runtime Environment (JRE)
from
here
(click on the Java Download icon,
because that install package includes
both the JRE and other components).
-
Go to
http://evo.caltech.edu/
-
If you haven't registered yet, then:
-
Click on
Register
-
Fill out the registration page.
-
Wait for the emailed activation link.
-
Click on the activation link.
If you get the following error,
then wait for approximately 5 minutes and try again:
ERROR:
The user registered with this id
doesn't exist anymore in our database.
-
Once that's successful,
go back to
http://evo.caltech.edu/
-
Click on
Start EVO
-
You may be asked whether to open the koala.jnlp
application, in which case open it with Java
(specifically the Web Start Launcher).
-
You may be asked
whether you trust to run the application.
Do so.
(This may happen multiple times.)
-
The "Koala" application will start,
and should eventually display a login window.
-
If, in Windows,
the Koala application gets to 38% and then crashes,
or otherwise doesn't seem to be working,
then do the following:
-
Kill Koala (if still running).
-
Click to your Start button
(in the lower left corner of your screen).
This will bring up your Start Menu.
-
If the version of Windows you're running has an
option Run (for example, in Windows XP),
then choose it;
otherwise (for example, Windows 7),
you're going to type in the Search text box
at the bottom of the Start Menu.
-
Type
cmd
and press the Enter key.
-
In the black command window that comes up, type
javaws http://evo.caltech.edu/evoGate/koala.jnlp
to start Koala from the command prompt.
-
Log in to EVO.
-
Scroll through the list of meetings to find
Intermediate Parallel
and click on it.
Or:
-
Click on
Meetings
->
Search for meetings
-
When the Search window pops up,
click on the button by
From all communities
-
Click on the box next to
Filter Titles
-
In the text box to the right of
Filter Titles,
enter
Intermediate Parallel
-
Click on
Search
-
Join the
Intermediate Parallel
meeting.
-
Check your speaker and microphone levels
to determine whether they're working properly.
Many thanks to Jeff Pummill, Patrick Calhoun and
Josh Alexander for providing these instructions.
-
H.323:
FREE but may be tricky
-
From an H.323 device
(e.g.,
Polycom,
Tandberg/Codian,
Lifesize,
etc):
-
If you ARE already registered with the
OneNet
gatekeeper:
Dial
2500409
-
If you AREN'T registered with the
OneNet
gatekeeper (probably the case):
-
Dial:
164.58.250.47
-
Bring up the virtual keypad.
On some H.323 devices,
you can bring up the virtual keypad by typing:
#
-
When asked for the conference ID, enter:
0409
-
On some H.323 devices,
you indicate the end of conference ID with:
#
-
From a Windows PC running Internet Explorer:
-
You MUST have the ability to install
software on the PC
(or have someone install it for you).
-
Download and install the latest
Java Runtime Environment (JRE)
from
here
(click on the Java Download icon,
because that install package includes
both the JRE and other components).
-
Download and install this
video
decoder.
-
Start Internet Explorer
(no other browser is guaranteed to work).
-
Copy-and-paste this URL into your IE window:
http://164.58.250.47/
-
When that webpage loads,
in the upper left,
click on "Streaming".
-
In the textbox labeled
Sign-in Name,
type your name.
-
In the textbox labeled
Conference ID,
type this:
0409
-
Click on "Stream this conference".
-
When that webpage loads,
you may see, at the very top,
a bar offering you options.
If so, click on it and choose
"Install this add-on."
-
Toll free land line phone bridge:
(Please only use if you can't get in via videoconferencing.)
800-832-0736, Access Code * 623 2874 #
(without the blank spaces)
OU IT's phone bridge can be used for FREE
by all remote offsite participants,
but PLEASE DON'T unless you have no other choice.
-
Sending questions:
If you're
participating remotely offsite via videoconferencing,
please send your questions via
Piazza.
-
Slides:
Slides, if any, will be posted to this webpage
before each session
(PowerPoint and PDF).
PLEASE DOWNLOAD THE SLIDES BEFORE EACH SESSION STARTS.
-
Streaming video:
Recordings will be posted to this webpage
as soon as possible after each session,
but we cannot guarantee a specific turnaround time.
-
Norman:
-
Hato Rey
-
Sunday July 31 - Saturday August 6
-
Workshop Sessions
(including after supper open labs):
Engineering Laboratories Building, room L 301
(campus map,
town map)
-
Meals (excluding breaks):
Multi-Purpose Building cafeteria
(roughly 1 block from the Lab Building)
-
Breaks:
Engineering Laboratories Building, outside L 301
Please review the material
here.
Norman:
In early August,
Norman weather tends to be hot but not wet.
Highs typically are in the 90s and 100s F,
lows in the 80s or 70s F,
with little or no rain.
You probably won't need an umbrella.
Hato Rey:
Expect warm and possibly wet.
Highs typically are in the 80s F (the record is mid-90s F)
lows in the 70s F,
and rain, possibly including thunderstorms,
is reasonably likely.
You may want to bring an umbrella.
Clothing:
We recommend dressing in layers.
Expect to dress light enough for being outdoors a little
but in an air conditioned PC lab a lot.
The lab may be a bit chilly, to keep the PCs happy.
This is especially true at PUPR,
where very strong air conditioning is typical:
a common remark from visitors is
"Puerto Rico is the coldest place I have felt (indoors)."
Laptops NOT Needed in the PC Labs:
You're welcome to bring a laptop with you
to Norman or Hato Rey,
but you won't need it for the workshop,
because
Monday August 1 to Saturday August 6
we'll be in PC labs
with at least as many PCs as attendees.
But, you may want your laptop with you
at other times.
DON'T bring extraneous stuff.
The PC labs will be very full with
people, video equipment, etc.
Air Travel
Will Rogers World Airport (OKC)
Click here.
San Juan Luis Munoz Marin International Airport
(SJU)
Click here.
Lodging for attendees at both OU and PUPR
has been booked and is being paid by the workshop sponsors.
Norman:
Guest Inn
2543 W. Main St, Norman, 405-360-1234
-
Lodging for out-of-town workshop attendees
is at the Guest Inn,
at no charge to the attendees
(except as noted below).
-
You will need to provide the hotel with a credit card
for any incidental expenses you may incur
(for example, in-room movies, phone charges etc).
-
Accomodations are provided at double occupancy
in a NON-SMOKING room with two beds.
-
Check-in is Sunday July 31 and check-out is Saturday August 6.
-
If you would prefer single occupancy,
then you will
have to pay the difference in room cost.
Each room is $273 for the full week,
so the upcharge will be half of $273 (i.e., $136.50).
This also applies if you plan to room with
non-workshop guests (for example, family).
Please note that we CANNOT guarantee
availability of a single room,
but it's likely that rooms will be available.
-
If you would prefer a smoking room,
please alert us IMMEDIATELY.
If we cannot find you a smoking roommate,
then you may have to pay the single occupancy upcharge,
IF a smoking room is available.
-
If you would like to check in before Sunday July 31
or check out after Saturday August 6,
you will need to make separate arrangements with the
hotel by calling 405-360-1234.
Please note that the hotel may need to put you in
a different room for the extra night(s),
and that there is a remote possibility
that you may need to stay at a different hotel,
depending on availability.
-
The Guest Inn has wireless Internet access throughout,
but of course the workshop cannot guarantee the quality
of your signal.
-
The Guest Inn provides a daily breakfast in the commons area.
We encourage you to take advantage of it,
because workshop breakfasts may be somewhat sparse.
Hato Rey:
San
Juan Beach Hotel
1045 Ashford Avenue, San Juan PR 00907
787-723-8000
-
As you drive out of the OKC airport,
look for the on-ramp to I-44
on your right.
There's only one such on-ramp,
which is actually I-44 westbound.
-
After you've been on I-44 W for
a few miles,
you'll come to a fork between I-44 W
and I-44 E.
Stay on I-44 W on the right side.
-
You'll come to a major curve.
DON'T take the I-44 W exit;
instead,
stay on the same road,
which will become I-240 E
(go figure).
-
After several miles,
take the I-35 S exit
(toward Dallas).
-
Follow I-35 S out of Oklahoma City,
through Moore,
and into Norman.
-
From I-35 southbound, take the W Main St exit
eastbound toward downtown Norman
(I think it's exit #109).
-
Take Main St eastbound a few blocks.
-
At the traffic light at
N. Interstate Drive, turn left (northbound).
Note that it's called N. Interstate Drive on your left
but 26th Drive on your right.
-
The Guest Inn will be immediately on your right (east).
Driving Directions
from the
Guest Inn
to the
Stephenson
Research & Technology Center
101 David L. Boren Blvd, Norman
(map)
Sunday July 31 2011 ONLY
Workshop check-in, 5:30-6:00pm @ OU, 6:30-7:00pm @ PUPR
Opening Session, 6:00-8:00pm @ OU, 7:00-9:00pm @ PUPR
-
From the Guest Inn, go out
and turn left (eastbound) onto Main St
at the traffic light.
-
After a few blocks, you'll come to 24th Ave (traffic light).
Turn right (southbound) onto 24th Ave.
-
Take 24th Ave southbound,
roughly 1 1/2 miles,
crossing traffic lights at Boyd St and Lindsey St,
to OK Hwy 9 (traffic light).
-
At the traffic light,
turn left (eastbound) onto OK Hwy 9.
-
On OK Hwy 9,
you'll cross traffic lights at
McGee,
Imhoff,
Chautauqua
and then you'll come to a traffic light at
Jenkins.
-
Turn left (northbound) onto Jenkins Ave.
On your right hand side,
immediately after you turn onto Jenkins,
you'll see first the
National
Weather Center,
then David L. Boren Blvd.
The
Stephenson
Research & Technology Center,
where
the Sunday July 31 evening
session
will be held,
is on Jenkins between
David L. Boren Blvd
and Columbus.
-
Turn right (eastbound) onto
David L. Boren Blvd.,
go past the National Weather Center
on your right,
then turn left (northbound)
into the Stephenson parking lot.
-
If you miss David L. Boren Blvd.,
then take
the next right (eastbound) onto Columbus,
and then turn right (southbound)
into the Stephenson parking lot.
-
PARKING:
Because parking isn't enforced on weekends,
you can park anywhere in the Stephenson parking lot.
-
Exit the Stephenson parking lot, turning right (westbound)
onto David L. Boren Blvd (by the National Weather Center).
-
Turn left (southbound) onto Jenkins.
-
Turn right (westbound) onto OK Hwy 9 (traffic light).
-
Take OK Hwy 9 back to I-35,
staying in the right hand lane
to enter I-35 N (toward Oklahoma City).
-
Go about 2 miles and
take the Robinson St exit (#110) eastbound,
turning left (eastbound) at the traffic signal
at the end of the off ramp (which is Robinson St).
-
Take Robinson St eastbound for about a mile to
N Berry Road (traffic light).
-
Turn left (northbound) onto Berry and
go a few blocks to a T-intersection at Westheimer Dr.
-
Turn right (eastbound) onto Westheimer
and go a few blocks to the intersection at Newton Dr.
-
The Merrick Computing Center will be on your left,
a one story orange brick building.
-
PARKING:
Park in the south lot, facing Robinson, if possible.
If you have to park in the north lot,
come around to the front entrance.
-
Exit the Merrick parking lot, turning right (westbound)
onto Westheimer Dr.
-
Turn left (southbound) onto Berry (first stop sign).
-
Turn right (westbound) onto Robinson (first traffic light).
-
Just past the Homeland grocery story at 24th Ave,
turn left (southbound) onto Interstate Dr
(BEFORE crossing I-35).
-
Follow Interstate Dr as it curves around,
past the Wal-Mart, and then the Guest Inn
will be on your left just before Main St (traffic light).
Driving Directions
from the
Guest Inn
to
Carson Engineering Center
202 W. Boyd St., Norman
Monday August 1 - Saturday August 6 2011
-
From the Guest Inn, go out
and turn left (eastbound) onto Main St
at the traffic light.
-
After a few blocks, you'll come to 24th Ave (traffic light).
Turn right (southbound) onto 24th Ave.
-
Take 24th Ave southbound to Boyd St (traffic light)
and turn left (eastbound) onto Boyd.
-
You'll cross several traffic lights,
including Berry, Flood,
Chautauqua, Elm, University,
and then you'll come to a traffic
light at Asp Ave.
-
Carson is on your right, on the southeast corner
of Boyd & Asp.
-
From inside the airport, head north,
then drive 1.2 km (3/4 miles).
-
Continue straight onto PR-17/Puente Teodoro Moscoso,
then drive 230 m (0.14 miles).
-
Take the ramp to PR-26/Expreso Baldorioty De Castro,
then drive 600 m (0.35 miles).
-
Keep left at the fork and merge onto PR-26,
then go 5.6 km (3.5 miles).
-
Exit onto Cll Marginal (frontage road to the right of PR-26),
then go 350 m (0.2 miles).
-
Turn right onto Ave Condado
(after you turn,
Escuela Madame Luchetti will be on your right and
a Quality Inn should be visible on your left),
then go 350 m (0.2 miles), about 3 blocks,
past Calle Earle and Calle Vendig.
-
Turn left onto Ave Dr Ashford, go 290 m (0.18 miles),
which is a few blocks,
and the San Juan Beach Hotel will be on your right,
just before a 3-way intersection among Ave Dr Ashford,
Calle Delcasse and Calle Magdalena.
If you get to the Restaurante Budatai on your left,
you've gone too far.
Driving Directions
from
the
San Juan Beach Hotel
1045 Ashford Avenue, San Juan PR 00907
to
PUPR
377 Ave Juan Ponce De Le
Sunday July 31 - Saturday August 6 2011
NOTE:
You can take the van at the hotel provided by PUPR,
instead of driving yourself to PUPR.
-
Head east on Ave Dr Ashford toward Cll Vendig,
then go 290 m (0.18 miles),
which is a few blocks,
past Calle Vendig and Calle Earle.
-
Take the first right onto Ave Condado,
then go 350 m (0.2 miles), about 3 blocks.
-
Slight left onto PR-2 W/Calle Roberto H. Todd,
then go 1.3 km (0.8 miles).
-
Take the ramp onto PR-1 S/Expreso Luis Munoz Rivera,
then go 3.2 km (2 miles).
-
Slight left to stay on PR-1 S/Avenida Luis Munoz Rivera,
then go 1 km (0.6 miles).
-
Turn left onto PR-41/Ave Eleanor Roosevelt,
then go 70 m (0.05 miles), one block.
If you miss the turnoff at PR-41,
then turn left at Calle Padre Las Casas,
Just after crossing PR-41/Ave Eleanor Roosevelt,
where the northbound and southbound lanes become
a single bidirectional road,
and then immediately turn left onto
PR-26/PR-1/Ave Juan Ponce De Leon.
-
PUPR is at the corner of PR-26/PR-1/Ave Juan Ponce De Leon
and PR-41/Ave Eleanor Roosevelt
(which becomes Calle Jose Marti by campus),
and is also bounded by Calle Padre Rufo and Calle Alhambra.
At OU
-
Parking at the
Stephenson
Research & Technology Center
Sunday July 31 2011
On weekends,
parking on campus
is open to the public
in lots with white signs with green lettering,
so everyone can park in the Stephenson lot at no charge
and without a visitor pass.
If you need a parking pass for the rest of the week,
you should pick it up Sunday evening at Stephenson.
-
Parking Options at
Carson Engineering Center
Monday August 1 - Saturday August 6
-
Parking Lot (free with visitor pass, which we'll provide)
-
Cross the traffic light at Asp.
-
Cross the next traffic light
at Jenkins.
-
The next street on your right is Trout.
Turn right (southbound) onto Trout.
-
Go past the
Sarkeys
Energy Center
parking lot
and take
the first right turn (westbound)
onto Page St.
-
Park in the first parking lot
on your left (south), across from Sarkeys.
-
Limited parking is available
in the various lots surrounding
Sarkeys.
We have a limited number of
visitor parking passes available.
-
Walking out of the parking lot,
go past Sarkeys and
cross Jenkins to follow
Felgar St toward the Union,
and at Asp Ave
just across from the Union and its parking deck,
turn right (northbound) toward Boyd St,
go past Felgar Hall
on your right (yellowish brick building),
and then Carson is
just past Felgar on your right,
on the corner of Asp and Boyd
(red brick and off-white concrete).
-
Parking Deck ($2 per hour -- not recommended)
-
Turn right (southbound) onto Asp
and park in the parking deck.
-
Walk out of the parking deck
toward Asp,
cross Asp,
and then Carson is on
the southeast corner of
Asp and Boyd.
At PUPR
Parking on campus at PUPR is free.
Visitor parking is just inside the main entrance to the campus.
Meals are provided during the workshop,
at no charge to attendees, as follows:
-
Sunday July 31: pizza party (includes vegetarian options)
-
Monday August 1, Tuesday August 2, Thu Aug 11, Fri Aug 12
-
8:00am @ OU/8:30am @ PUPR: Breakfast (light)
-
10:00-10:30am @ OU/11:00-11:30am @ PUPR: Midmorning snack
-
12:00noon-1:30pm @ OU/1:00-2:30pm @ PUPR: Lunch
-
3:00-3:30pm @ OU/4:00-4:30pm @ PUPR: Midafternoon snack
-
5:00-7:00pm @ OU/6:00-8:00pm @ PUPR: Supper
OU: at the
Oklahoma Memorial Union,
diagonally across Asp Ave from Carson
-
Wednesday August 3
-
8:00am @ OU/8:30am @ PUPR: Breakfast (light)
-
10:00-10:30am @ OU/11:00-11:30am @ PUPR: Snack break
-
12:00noon-1:30pm @ OU/1:00-2:30pm @ PUPR: Lunch
-
Afternoon and evening:
meals on your own, at your own expense
-
Saturday August 6
-
8:00am @ OU/8:30am @ PUPR: Breakfast (light)
-
10:00-10:30am @ OU/11:00-11:30am @ PUPR: Midmorning snack
-
Although we will try to accomodate special requests,
we cannot make guarantees.
We typically CAN provide a vegetarian option,
which typically will include dairy products.
We typically CANNOT provide for more specific needs
such as vegan, kosher, halal, gluten-free, etc.
Entrees typically are chicken, turkey or beef,
and typically a vegetarian option is provided,
but while we make a best effort to provide an
appropriate vegetarian option,
we CANNOT guarantee that the vegetarian option
will meet everyone's specific needs.
If you're concerned about the specifics of the meals,
please contact us.
-
Sunday July 31
-
Terascale, Petascale, Exascale and Beyond
Coming soon
-
Storage Hierarchy Recap
Coming soon
-
Monday August 1
-
Learning Batch Computing on Sooner
Coming soon
-
MPI Cheat Sheet
Coming soon
-
OpenMP
Coming soon
-
Tuesday August 2
-
Taxonomy of Parallelism
Coming soon
-
Hybrid Model Parallel Programs
Coming soon
-
Debugging Parallel Programs
Coming soon
-
Lab: Debugging Parallel Programs
Coming soon
-
Wednesday August 3
-
Scientific and I/O Libraries
Coming soon
-
Thursday August 4
-
CUDA Part 1
Coming soon
-
CUDA Part 2
Coming soon
-
Friday August 5
-
Hybrid CUDA
Coming soon
-
Cluster Software
Coming soon
-
Benchmarking and Tuning
Coming soon
-
Saturday August 6
Attendee presentations won't be posted.
|
